Bag sample development is not a sequence of increasingly polished bags. Each major sample is a decision gate with a different job. HONG STUDIO’s three principal public milestones are:
Development Sample → Pre-Production Sample (PPS) → Shipping Sample
The three sample stages at a glance
| Stage | Main purpose | What can still change | Decision supported |
|---|---|---|---|
| Development Sample | Develop and resolve the product direction in physical form. | Appearance, structure, function, materials, hardware, construction, and finish may still be refined. | Continue development or prepare the product for PPS. |
| PPS | Represent the product intended for bulk production. | Production-relevant details should be closed; any remaining mismatch must be resolved before confirmation. | Confirm production intent and support release to bulk production. |
| Shipping Sample | Provide a reference drawn from the actual bulk batch. | It is not a redesign stage. | Client review or confirmation before shipment, where applicable. |
Review each sample against its intended decision, not simply how finished it looks.
Development Sample: resolve the product direction
The Development Sample establishes whether the intended product direction works physically. It brings appearance, structure, function, materials, hardware, construction, and manufacturing feasibility together at a representative development stage.
It may confirm that the main direction is viable or reveal that parts still conflict. A closure may not give the intended access; a material may not hold the expected form; a structural choice may affect appearance or assembly. These findings belong to development, when the product can still be revised deliberately.
Not every detail must already be final. Materials, hardware, color, branding, dimensions, construction, or finish may remain provisional if their status is understood. The decision supported is whether to continue refinement and, eventually, prepare a production-intent version.
Paper, cardboard, or microfiber mock-ups may support work inside the Development Sample process, but they are not additional principal sample stages. The Research & Development page explains the wider physical-development capability.
What must close before PPS
The transition to PPS is where provisional development choices become production-intent decisions. It is not enough for the Development Sample to be generally liked; the information needed to reproduce the intended product must be brought into alignment.
Remaining decisions may include final materials, hardware, color, structure, construction, surface finish, and relevant sizes or variants. A change in one area must be checked for its effect on the others. If the final material behaves differently from the Development Sample material, for example, the physical result and construction may need another review rather than a paperwork-only substitution.
Production information must also catch up with the approved decisions. The pattern, material and color references, component details, specifications, and process requirements used for production should correspond to the product represented by the PPS.
PPS: confirm the production-intent product
The PPS should represent the product intended for bulk production. It is the point at which the physical reference and current production information should describe the same product.
That alignment matters because a physical sample cannot communicate every production requirement by itself. It shows the approved result, while the related information identifies the materials, components, patterns, construction, color, finish, and variants that must reproduce it.
PPS confirmation supports release to mass production by establishing the agreed production intent against which manufacturing can proceed. The Production page provides context on the subsequent manufacturing stage.
Shipping Sample: review the bulk-production reference
A Shipping Sample is drawn from the actual bulk-production batch and may be provided for client review or confirmation before shipment. Unlike the Development Sample, it is not intended to reopen product development. Unlike the PPS, it is not made before bulk production as the product to be released.
Its value is that it provides a physical reference from the manufactured batch at the pre-shipment point, where applicable.
Keep revisions tied to the right sample
When a sample changes, the affected reference information should change with it. A concise review needs four connected elements: sample version + confirmed decision + open point + affected production information.
If a handle position changes, for example, the approval should not live only in a comment beside an outdated sample. The relevant pattern, dimensions, reinforcement, or component information must reflect the accepted version where affected.
This is revision control in service of a decision, not an internal documentation exercise. It prevents an approved visual change from being separated from the information needed to reproduce it.
Reviewing each sample against its stage purpose keeps the gates clear: develop the direction with the Development Sample, close production-intent decisions in the PPS, and use the Shipping Sample as a reference from the actual bulk batch.
Discuss your current sample-development stage with HONG STUDIO
